ADJUSTABLE FRAMEWORK Designed to support Consoles, Switchgear Cubicles, Air Conditioning Units and any heavy equipment where there is a requirement for heavy cables and pipe work. Frames can be built to suit any length, width and floor height. Frame supports are easily adjusted by a 'thread' adjustment.

Easy to install Pedestal can be fitted at any distance to suit loading requirements. Each pedestal is designed to withstand a minimum of 25kN vertical load. Creates a clear, unobstructed cavity for heavy cables (angles coloured blue support floor panels). Pedestals have a minimum of 60mm adjustment to cater for discrepancies in the level of the structural slab to maintain a level frame.

FLOOR STEM, BASE & HEIGHTS 27mm diameter x 3.2mm wall thickness electro zinc plated and swaged to 100 x 100 x 3mm thick galvanized base plate. 20mm threaded stud to allow adjustment of 60mm to cater for irregularities in the structural slab. Heights for cavities 140 to 1200mm. 50mm diameter x 2mm wall thickness electro zinc plated steel welded to 140 x 140 x 3mm thick base plate. 20mm threaded stud to allow adjustment of 60mm to cater for irregularities in the structural slab. Heights for cavities 140 to 2400mm.